Thuis Productenvezel optische vlecht

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D

Certificaat
China WanyYi Telecom Tech Co.,Limited certificaten
Klantenoverzichten
Technologie-departementen zeggen ook goed, prijsgoed.

—— Adnan Khan

Het is geschikt, snel, stabiel. opnieuw zal kopen

—— Michael Hantelmann

Hier kopen de eerder gebruikte originele de optische vezelzendontvangers van H3C, nu, zegt technologie geen verschil, opnieuw zal kopen.

—— Fadi Dahdouh

Het is verrassing voor eerste overeenkomst! de goede kwaliteit, fijn vakmanschap, stelde tevreden!

—— Tony Miller

Compatibel goed, verzekerde kwaliteit, geduldig beantwoordden zij vragen

—— Victor Anayo

Ik ben online Chatten Nu

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D
4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D

Grote Afbeelding :  4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D

Productdetails:
Plaats van herkomst: China
Betalen & Verzenden Algemene voorwaarden:
Min. bestelaantal: 1pcs
Verpakking Details: Standaardverpakking
Levertijd: 3-5days
Betalingscondities: L/C, T/T, Western Union, MoneyGram
Levering vermogen: 80000PCS/WEEK
Gedetailleerde productomschrijving
Productnaam: 12-kern bundelvlecht Optische kabel buitendiameter: 3mm
Uitwisselbaarheid: ≤0.2dB Testgolflengte: 1310nm~1550nm

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D

 

Prodcuct Parameters
Interface model:SC- Product Name:12-core bundle pigtail
Operating temperature:'-40to +85 Optical cable outer diameter:3mm
Interchangeability:≤0.2dB Fiber attenuation:1dB
Mating times:≥1000times Ferrule type:Class A ceramic ferrule
Test wavelength:1310nm~1550nm Tensile strength:70N
Tensile strength:≥200N Vibration test:0.1dB

 

OEM/ODM Accepted

List No. Item Model Test requirements SM MM
PC UPC APC PC UPC
1 IL LC/SC/FC/ST/MU/E2000 (Connect with standard plug and standard adapter)
100%test
≤0.3 ≤0.3 ≤0.35 ≤0.3 ≤0.3
2 RL LC/SC/FC/ST/MU/E2000 (Connect with standard plug and standard adapter)
10% sampling rate
≥50dB ≥50dB ≥60dB ≥25dB
Field connector, Cold splice (Connect with standard plug and standard adapter) Field connector:Embedded:UPC≥40dB,APC≥50dB
Hot melt type:UPC≥50dB,APC≥60dB
Cold splice:≥40dB
3 3D pass rate LC/SC/FC/ST/MU/E2000 Physical inspection ≥85%
4 End face standard LC/SC/FC/ST/MU/E2000 Physical inspection No defects in area A
Allow zone B ≤1μm scratches, ≤2μm spots, and the total number of scratches plus spots is less than 5.
Allow C zone ≤2μm scratches, ≤2μm spots, unlimited number, ≤3μm aprons
No defects in area A
Allow zone B ≤2μm scratches, ≤3μm spots, and the total number of scratches plus spots is less than 5.
Allow C zone ≤3μm scratches, ≤3μm spots, unlimited number, ≤5μm aprons
5 Appearance requirements Field connectors, cold spice, adapters, fiber optic connectors Visual inspection (refer to swatches and sealing samples) Product appearance and corresponding design, manufacturing requirements are everywhere: the appearance should be smooth, clean, free of oil, burrs, no scars and cracks, bright color, good consistency, and the components must be tight and flat; the appearance of the optical cable should be smooth and bright. No impurity, no damage, clear printing, color conforms to product requirements
6 Material requirements adapters Physical inspection The adaptor should use ceramic sleeves, the outer shell of the adaptor and other plastic parts should be flame-retardant, and the metal material should use HPb59-1 copper
7 Tensile test {pigtail (cable) or connector with fiber below Φ1.0mm is not applicable, adapter is not applicable} MTP/MPO Test conditions: A) Load: nN: B) Load time: 10 minutes: C) Load rate: 50N/min<rate<250N/minute; D) Distance from the point of load to the plug: L=22~28CM.
Requirements after the test: A) There should be no mechanical damage such as deformation, falling off, and loosening. B) Optical performance conforms to: Insertion loss change <0.1dB (MU<0.1dB, MTP/MPO<0.3dB) Return loss change <5dB
≥50
FC/SC/E2000 ≥50
MU/LC ≥70
  LC ≥90
Leather cable ≥50
Hot melt type ≥40(Leather cable, 2.0 soft optical cable)
≥50(3.0 soft optical cable)
Embedded type ≥30(Leather cable, 2.0 soft optical cable)
≥50(3.0 soft optical cable)
Cold splice ≥4(0.125,0.25 optic fiber)
≥10N(0.9 optical cable)
≥30N(Leather cable)
8 Tensile strength of adapter locking mechanism SC Test conditions: A) Load: nN: B) Load time: 10 minutes (MU load 1 minute); C) Load rate: 50N/minute; <speed<250N/minute; D) Distance from the point of load to the plug: L =22~28cm.
Requirements after the test: A) There should be no mechanical damage such as deformation, falling off, and loosening. B) Optical performance conforms to: Insertion loss change <0.2dB, Return loss change <5dB
≥50
MPO
LC ≥80
MU

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D 0

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D 1

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D 2

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D 3

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D 4

4 Core Single Mode Fiber Optic Cable Pigtail APC/UPC Bundled Pigtail G652D 5

Contactgegevens
WanyYi Telecom Tech Co.,Limited

Contactpersoon: Michelle

Tel.: +8617512019005

Direct Stuur uw aanvraag naar ons (0 / 3000)